How do I fix my Coke Freestyle machine?

How do I fix my Coke Freestyle machine?

Steps to Fix this issue

  1. Reboot Coca-Cola Freestyle to resolve.
  2. Open the doors.
  3. Turn off green main power supply.
  4. Wait 30 seconds.
  5. Turn the main power supply back on.
  6. Wait for reboot to complete (this takes approximately 4-1/2 minutes).
  7. After the reboot completes, test multiple flavors to verify system operation.

What should co2 pressure be for soda?

The High Pressure Regulator (photo A) controls the amount of CO2 gas your system uses to make carbonated water. Your High Pressure gauge should be set at 105 PSI for standalone carbonators, 95 PSI for remote refrigeration carbonators and 75 PSI for Bevariety™ dispensers and cold carbonators in counter electric units.

How do you adjust the syrup on a Coke machine?

To adjust the syrup strength you need to turn the syrup adjustment screws with a flat head screwdriver – clockwise to lessen the amount of syrup and anti clockwise to increase the amount of syrup.

How do I reset my carbonator?

Unplug all beverage dispenser electrical cords from the outlet, ensure that if the carbonator has a power switch it is in the on position, then wait 15-20 seconds and plug the cords back in. Allow the carbonator motor to run until it stops.

How do you unlock Coke Freestyle?

Managers can lock the Coca-Cola Freestyle dispenser to prevent drinks from being poured without having to manually power off the unit. There are two ways the dispenser can be locked: Manual Setting Slide the “Until I Unlock” toggle switch to “enable” the Manual Unlock feature.

What is the carbonation level in Coke?

Carbonation Levels

Drink Classification Volumes of CO2
High-Carbonated Soda: Coke and Pepsi 3.5–4
Mixes: Club Soda & Tonic Water 2.5–3.5
Low-Carbonated Soda: Lemon/Lime 2.5–3.5
Typical Lager Beer 2.4–2.6